Edit Abutment Emergence Area
  • 1 Minute to read
  • Dark
    Light
  • PDF

Edit Abutment Emergence Area

  • Dark
    Light
  • PDF

Article summary

Edit Abutment Emergence Area

Edit Abutment Emergence Area.png

All Abutments and Hybrid Abutments have an Emergence Profile. The Emergence Profile is the surface of a designed abutment which touches and follows the contour of the existing soft tissue. This emergence curve or finish line is detected automatically by MillBox and a blue line is projected onto the abutment. 

Any surface detected to be in the Emergence Profile between the interface and the curve will be colored green. This information is vital to the CAM to ensure the finishing operations are able to discern this area from the rest of the part - as it will typically be machined differently.

image.png

If your part does not import with this line already present, you can use this tool to automatically detect it or to manually designate this area.

If you have to manually draw the emergence curve, you can do so as follows:



Was this article helpful?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.