Specify a Secondary Finishing Axis
  • 1 Minuto para Ler
  • Sombrio
    Luz
  • Pdf

Specify a Secondary Finishing Axis

  • Sombrio
    Luz
  • Pdf

The content is currently unavailable in Portuguese. You are viewing the default English version.
Resumo do artigo

Specify a Secondary Finishing Axis

Specify a Secondary Finishing Axis.png

Specifying a secondary finishing axis will adjust the occlusal side finishing toolpaths to follow the orientation specified with this tool. This tool should only be used on parts that require the entire occlusal toolpath to shift. Examples of these parts would be Implant Bars or Abutments that have angled top-caps (split-files):


NOTE: Here we can see an example of an abutment with an angled top-cap. If we were manufacturing this as part of a split-file (with a co-designed crown), we will need to ensure there are no undercuts (shaded in Blue) left un-machined as these un-machined areas would prevent the crown from properly seating:

Specify a Secondary Finishing Axis 3.png

Autodetect Axis from 2 Points

Autodetect axis from 2 points.png

To use this tool, simply select 2 surfaces along a parallel plane. The CAM will automatically detect the Secondary Finishing Axis based on these points.

Assign View to Secondary Axis

To use this tool, simply orient your camera / view to the insertion / axis direction desired and click anywhere on the part for which you want to define a secondary finishing axis:


Este artigo foi útil?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.